致力于碳化硅电热元件的生产
中国河南中岳碳化硅电热元件生产商
24小时咨询热线
13939069448
R元件使用温度与表面负荷关系
Element using temperature and surface load
硅碳棒电炉设计参考数据
Silicon carbide furnace design data for reference
1、二穿棒孔之间的中心距为棒端部直径的3-4倍
The two rod threading hole between the center distance is 3-4 times the diameter of the rod end
2、炉墙及被加热物与元件中心间的距离不小于下表数据
The fumace wall and the material to be heated and elementbetween the distance of not less the data in the table below
3、炉墙穿孔直径应为所用棒直径的1.5倍，间隙用石棉线等堵严。
The furnmace wall perforation should be used for 1.5 times the bardiameter,gap with asbestos line blocked strict.
老工艺U型硅碳棒介绍
Tel：
